English
Español
العرب
After the shower is turned off, dripping water is caused by the unbalanced air pressure inside the shower, causing water to flow out of the shower. Because after we use the shower head, the air pressure inside will be out of balance when it is turned off, causing a lot of stored water to flow out of the shower head.
The solution to the dripping water after the shower is turned off:
1. Replace a corresponding gasket, so that the spilled water can be solved. If the shower is dripping normally, it must be due to the aging time inside the gasket.
2. If the glue is not sticky, it is recommended that the owner replace the shower with a new one. If there are cracks in the contact part of the shower, it will also cause the shower to drip and leak.
3. On the other hand, if there is dripping water, the shower may be caused by internal blockage. After dismantling the sprinkler, there may be some stones in it, etc., which block the normal flow of the water flow, which may allow it to store water in it and then drip.
How to choose a shower head:
A well-designed shower head ensures that each spray hole distributes roughly the same amount of water, so choose a sprinkler that can see the water. Water-saving function is a key factor that must be considered when purchasing a shower. Some sprinklers use steel ball spools and are equipped with a hot water controller to adjust the flow of hot water into the mixing tank so that the hot water can flow out quickly and accurately. This design is more reasonable than the general shower to save 50% of water.
